Girum Computer Blog

1. go to SCSM console administration 2. security 3. user roles 4. double click to edit the specified user role 5. go to tasks 6. tick edit generic edit task for work items

Install Error From the screenshot the machine have Corrupted Performance Counters, please execute the steps in below Microsoft Support Library:                                                                i.       https://support.microsoft.com/en-us/help/300956/how-to-manually-rebuild-performance-counter-library-values Open Command Prompt as Administrator cd c:\windows\system32 lodctr /R cd c:\windows\sysWOW64 lodctr /R winmgmt /salvagerepository winmgmt /RESYNCPERF After executing this commands you’ll need to restart the machine before restarting the install.

solution  How to Archive outlook 1. go to file in the above left corner of outlook 2. info==>tools 3. clean up old items(archive) 4. select the above mail address in the popup box to archive all folders but if you need to archive specific folder only select the folder 5. set the date in the bottom of popup box 6. click back icon in the top left outlook corner 7. check the archive status in the below of outlook status bar

Solution How to configure outlook ? To resolve the issue raised on outlook configuration there is a need to reset client profile, to do this please follow the below steps. Step 1: Open control panel == > type control panel on windows search box -> click on control panel icon Step 2:   Type mail on search box and click on mail (32) bit Step 3: Click on show profile button Step 4:   Remove the existing profile: Click on remove button -> click on yes                                                   Step 5: Click on Add button Step 6: Type profile name and click ok Step 7.1: Click next and finish Step 7.2: In case if the profile is not on manual setup ...

Solution how to activate windows 10 offline with cmd 1. open cmd run as admin 2. write this one and hit enter==>       slmgr.vbs /upk 3. write this one and hit enter==>       slmgr /ipk NPPR9-FWDCX-D2C8J-H872K-2YT43 4.wait in the command until the windows successfully activated popup comes. else change the above serial by the below editions Home: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99 Home N: 3KHY7-WNT83-DGQKR-F7HPR-844BM Home Single Language: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH Home Country Specific: PVMJN-6DFY6-9CCP6-7BKTT-D3WVR Professional: W269N-WFGWX-YVC9B-4J6C9-T83GX Professional N: MH37W-N47XK-V7XM9-C7227-GCQG9 Education: NW6C2-QMPVW-D7KKK-3GKT6-VCFB2 Education N: 2WH4N-8QGBV-H22JP-CT43Q-MDWWJ Enterprise: NPPR9-FWDCX-D2C8J-H872K-2YT43 Enterprise N: DPH2V-TTNVB-4X9Q3-TJR4H-KHJW4

Solution go to wamp icon==>apache==>httpd.conf(open)==>find and replace #listen 12.34.56.78:80 listen 0.0.0.0:80 listen[::0]:80    replace the above 3 listen by below #listen 12.34.56.78:8080 listen 0.0.0.0:8080 listen[::0]:8080 save and go back to wamp icon go to wamp icon==>apache==>httpd-vhosts.conf(open)==>find and replace Virtual Hosts *:80      by  Virtual Hosts *:8080 save and go back to wamp icon restart all service  wait for 10-20 seconds     if wamp ask you user name and password in wamp 3.... default username is root and don't use password 2. and if the problem is not resolved goto task manager==>processes==>mysqlid==>endtask goto wamp icon back and restart all services.

Solution How to give IP change Privilege only in PC instead of local admin 1. add user to Network_Configuration group in your active directory 2. go to in his PC control panel 3. write in the above search turn windows feature on/off 4. tick starting from TCP/IP to windows gadget 5. restart PC 6. try to change IP when it ask authentication you can use the granted username for this pc.

Solution Trust relationship with primary domain and local computer failed.   first log in by local admin  1. Right click on my computer then select property 2. Then select change setting 3. Click on Network id 4. my company uses a network with a domain ==> next 5. this computer is part of a business network ==>  next 6. you will need the following info. ==>  next 7. Then type Admin user name, password and domain name ==>  next 8. Verifying account of the computer and domain ==> yes 9. add the following domain user account (fill user name and domain) 10. Choose an account type ==>next 11. Click finish then restart  the computer

Solution How to install SCSM first download 3 software from Microsoft official site  needed software name 1. download SC2019_SCSM 2.  download   SC2019_SCSM_AUTH 3.   download   SQL_AS_AMO64 installation procedure 4. Run SC2016_SCSM_X86.exe 5. Next 6. I accept 7. Next 8. Finish 9. Run SQL_AS_AMO.msi 10. Next 11. I accept 12. next 13. Install 14. Finish 15. Close  16. Go to local disk C 17. SC 2016 SCSM 18. Service Manager console 19. ORG     "CompanyName"  20. I read 21. next 22. Install and check prerequisites again 23. Next Next Install  24. Open the service  25. close 26. Server name      "service manager workflow server name" 27. Connect

Solution How to join domain or out from domain how to join domain:- 1- Start →right click computer→property then click change setting→change →computer name(u can edit it)→domain (eg.   ethio.local) how to out from domain:- 1- Start →right click computer→property then click change setting→change →computer name(u can edit it)→workgroup (eg.   use any name)

Solution How to give admin privilege on PC  1. go to this PC  2. manage 3. local user & groups 4. groups 5. administrator 6. add => username =>check name =>ok =>apply => ok then  7. open Active directory and find computer name 8. move computer name to (Admin group)zzz computer

Solution How to delete Corrupted Profile for the domain Computer 1. login to user PC via Admin 2. write regedit in the start search 3. local machine/sw/microsoft/windowsNT/current version/Profile list 4. select name and delete profile then go to local disk c: users  open old user name copy files from old to new profile

Solution How to unhide  a hidden file Click on Start Click on computer Click on Organize  Click on View Click on Show hidden file and Uncheck the next 3 cheek box  Click on Yes button of Warning Message box Click on Apply and OK buttons respectively.   check your file

Solution Enable Remote Desktop, Allow users to connect remotely For PC to connect remote connection 1. local group policy editor 2. computer configuration 3. Administrative templates 4. system 5. credential delegation 6. encryption oracle remediation  7. make it enable and protection level vulnerable For Server Enable Remote Desktop for Administration By default, Remote Desktop for Administration is disabled. To enable it, follow these steps: Click Start, click Control Panel, and then click System. Click the Remote tab, click to select the Allow users to connect remotely to your computer check box, and then click OK.

Solution .Net 3.5 install offline with cmd first find sxs file from windows OS cd or ISO 1. open os cd 2. go to sources\sxs 3. copy sxs folder to c:\sources 4. open CMD run as administrator 5. copy this to CMD Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:C:\sources\sxs /LimitAccess and hit Enter.

Solution The requested operation requires elevation (UAC) when we get "The requested operation requires elevation" warning, when we insert user name and password for some admin issue we can solve by turn off user account control setting. 1. go to start menu 2. control panel 3. write in the search box UAC (change user account control setting) 4. make it down to never notify